Include Drivers, EEPROM Writer and User. Do not install or use any software from Prolific website until you have read. PL-2303 Linux Driver for RedHat 7.3. Oct 29, 2004 - Me98 driver v2.0.0.19 when using the eeprom writer program. The pl2303hxd. Eeprom writer for pl2303 usb to serial. Chip pl2303 design.

The USBDC1-C is a USB to TTL UART converter is one of the simplest and most reliable cables on the market. Utilizing a Prolific PL2303HX USB to TTL IC, the cable creates a direct connection from the UART of a microcontroller to a PC through a USB port with no additional components. This cable can be used on any microcontroller based system with an available UART such as Atmel AVR, MSP 430, Arduino, etc.

The USB connector has a clean, professional look giving your project an edge over bare board models and protecting the circuitry and your computer from accidental shorts. The shell can be easy popped apart and there is access to 5V, Gnd, Tx, Rx, CTS, DTR pins inside. • Four wires with independent.1″ spacing ( 2.54mm) headers • All the circuitry is built into the USB A style connector 2”x 3/4”x ¼”.

Posted: 2004-10-29 19:24 i want the eeprom writer from prolific. It was mentioned in one of the posts by morgan davis the post read. I FIXED THE PROBLEM! I opened up the box on the cable and found the chip version was pl-2303HX.

Got the drivers for it and that didnt work. At this stage i was desparate, and i found on the Prolific site an EEPROM writer, so i tried changing the PID to 2303 from its original 1234. Then i accidentaly hit the 'writer default' button. It went through and changed a bunch of the eeprom. If any one has downloaded the file from prolific, please could you send it to me? Posted: 2004-11-01 10:00 I'm not really a big expert about eeprom & eep writer, but my idea was to modify something on the pl-2303hx chip of my usb data cable. I read this post and I hope to resolve this problem!

Vendor email me that 'The cable have superfluity charge function. If this function can't use. It isn't product problem. Best wishes!' But charge function doesn't work!!! (( Driver installation was succesfully, before with vendor's driver and then with this driver System Hardware tell me 'Profilic USB-to-Serial Com Port', then I think that i'm not wrong.

But, why doesn't my cable charge my phone??? The cable has a switch that I suppose turn on/off charge function.

Posted: 2004-11-01 13:22 i didnt think you need the chip number for eeprom writers. But if it is necessary i want pl2303. But in any case send me whichever one you have for prolific chips as for the other post, the eeprom/ cable is fine if u can communicate with ur mobile. Korolek ptichka pevchaya noti dlya gitari.

Th charging doesnt happen because of some loose cables. Open the cable's black box and see if any cables are unconnected. I can guide further, if you reply on above. I am really frustrated with this cable.

I am thinking of ripping the mobile connector from the usb cable and making a normal serial one. Then i wont need to worry about the @$$#0!e cable's drivers!! Even though this way i lose the worth of my money i paid for that usb s#!+, i'll get something working.!!!